Radio Shack PRO-96 CHANGING THE RECEIVE MODE, Press, locked-outfrequencies, 4.Press FUNC and then 6. The, AM – configures the channel for AM mode, List cleared

2.Select the search bank in which you want to clear all locked-out frequencies.

3.Press FUNC and then press L/OUT. Lockout list appears in the scanner’s display.

4.Press FUNC and then 6. The

scanner will display Confirm list clear? 1=YES Press other key for NO. Press 1 to clear all

locked-out frequencies.

List cleared appears for about 2 seconds. Press any key other than 1 to cancel clear.

CHANGING THE RECEIVE MODE

The scanner defaults to the commonly used AM or FM/Digital receive mode for each frequency range. The preset mode is correct in most cases. However, some amateur radio transmissions and trunked systems do not operate in the preset mode. If you try to listen to a transmission when the scanner is not set to the correct receive mode, the transmission might sound weak or distorted.

To change the receive mode, repeatedly press MODE. The receive mode changes as follows:

AM – configures the channel for AM mode.FM/DIGITAL– configures the channel for the FM/DIGITAL mode.CT – configures the channel for CTCSS mode.

69