Getting Started

11.{On Hook Dial} keyUse to dial a number while hearing tone.12.{User Tools/Counter} keyUse to change default or operation pa-1 rameters according to the operating con- ditions.13.{Clear Modes} keyPress to clear the current setting.14.{Clear/Stop} keyClear: Clears an entered numeric value.Stop: Stops scanning or other operations.15.Main power indicator and On indicator

The main power indicator lights up when the main power switch is set to on. The On indicator lights up when the machine is on.

20.Quick Dial keys

Use to select the programmed destination at a single touch or to enter letters and symbols.

Reference

For more information, see General Settings Guide.

Note

❒You can program up to 32 destina- tions in the Quick Dial key.21.Quick Dial Flip Plate

Flip this plate down to access Quick Dial keys 01 through 16, flip up to access keys 17 through 32.

22.Data In indicator23.Online indicator
16.Operation switch

Press to turn the machine on. The On indicator lights up. To turn the machine off, press this switch again.

Note

❒This key is inactivate while scanning or setting Facsimile Features.17.User Function keysEach of these can be programmed for rapid access to frequently used features.❖Features Programmed by Default

Key Function

F1 Start Manual Reception

F2 Switch RX Mode

F3 Transmission Stamp

18.{Transmission Mode} key

Press to toggle between Memory Transmission (Memory Trans.) and Immediate Transmission (Immediate Trans.) modes.

19.{Resolution} key

Press to switch between Standard, Detail and Fine. When the resolution type is se- lected, the corresponding indicator lights.

24.{Online} key25.{Lighter} and {Darker} keys

Press to change the setting of image den- sity. Select the image density in five steps from Lighter to Darker.

26.{Original Type} key

Press to select the original type programmed with Text or Photo. When the original type is selected, the corresponding indicator lights.

27.{Cancel} keyPress to cancel an operation or return to the previous display.28.{OK} keyPress to set a selected item or entered characters.29.{Pause/Redial} keyPause:

Inserts a pause when you are dialing or storing a fax number. A pause cannot be inserted as the first digit.

Redial:Press to redial one of the last ten destina- tions.

8