Manuals / Brands / Computer Equipment / All in One Printer / Ricoh / Computer Equipment / All in One Printer

Ricoh 2018 When {Facsimile} Key Is Lit in Red, When {Facsimile} Key Is Lit in Red

1 88

Download 88 pages, 2.56 Mb

When {Facsimile} Key Is Lit in Red

When {Facsimile} Key Is Lit in Red

If this key is lit, press the key to enter the facsimile mode. Then, refer to the table below and take the appropriate action.

		Search	Check	Job
	Facsimile	Destination	Destination	Information
Commu-	Receive File	01	02	03
nicating
	Immediate	ABC	DEF	GHI
Start Manual	Trance.
Start Manual	Memory	05	06	07
Reception	Trance.
		MNO	PQR	STU
				AAN116F

Problem	Solutions
A facsimile error has occurred.	The facsimile has a problem. Contact your ser-
	vice representative. See p.69 “Error Messages
	and Their Meanings” The copier will still func-
	tion normally.	5
Out of paper	Add more paper.	5
	"Loading Paper", Copy Reference
A network error has occurred.	• Check the displayed message. See p.69 “Er-
	ror Messages and Their Meanings”.
	• Check the machine is correctly connected
	to the network, and the machine is correct-
	ly set. See Network Guide.
	• Consult your network administrator.
	• When the key is still lit in red even if you
	take the measures above, please contact
	your service representative.

67

Contents

FAX Option Type Operating Instructions Facsimile Reference <Basic Features Getting Started Page Manuals for This Machine ❖Manuals for DeskTopBinder Lite [Setup] [Start] ❖Manuals for ScanRouter V2 Lite ❖Other manuals TABLE OF CONTENTS Searching for a Destination 3. Using Internet Fax Functions Internet Fax Functions Canceling Internet Fax Transmission 4. Programming NOTICE -Noticeabout the Telephone Consumer Protection Act (Valid in USA only) Note to users in Canada -Note: Remarque concernant les utilisateurs au Canada -Avertissement: Important Safety Instructions Caution How to Read This Manual Symbols Names of Major Option Page 1. Getting Started Control Panel 11.{On Hook Dial} key Use to dial a number while hearing tone 12.{User Tools/Counter} key Use to change default or operation pa 1 rameters according to the operating con- ditions Reading the Display 1.Machine status or currently se- lected function 2.Message ❖When Internet Fax Setting is ON 1.Switches the destination be- tween fax number and e-mailad- dress 3.Destination entry Communication display ❖ Memory Transmission (fax transmission) ❖Reception ❖Immediate Transmission ❖TX Mode User code entry display 2. Faxing Transmission Modes Switching between Memory Transmission and Immediate Transmission Transmission Mode [Home Position] [Key Operator Tools] Placing Originals Placing a Single Original on the Exposure Glass Placing Originals in the Optional ADF or ARDF A Adjust the document guide to match the size of the originals B Align the edges of the originals and stack them in the ADF or ARDF face up 1.Limit mark 2.Document guide C Remove the original and replace it on the exposure glass D Press the {Start} key -Specifyingthe Original Size Manually Staet If the Machine Cannot Detect the Size of Your Original Original sizes difficult to detect ❖Metric Version ❖Inch Version Memory Transmission Memory Transmission A Make sure that Memory Trans. indicator lights D Specify a destination ❒If it is not, press the {Transmis- sion Mode} key B Place the original in the ADF or ARDF, or on the exposure glass F Specify a destination 2Note [Delete] G Press the {Start} key -Sendingoriginals using the exposure glass Canceling a Memory Transmission While the Original Is Being Scanned While the Original Is Being Transmitted or Before the Transmission Is Started C Press [Stop TX] 2D Press [Delete] [No] Immediate Transmission C Select the scan settings you re- quire E Press the {Start} key Page Canceling an Immediate Transmission Before You Have Pressed {Start} Key After You Have Pressed {Start} Key Scan Settings Resolution Original Type Image Density (Contrast) When placing originals in the optional ADF or ARDF Specifying a Destination Entering a Fax Number Using the Tone function with On Hook Dial Entering an E-mailAddress Using the Destination List Specifying a destination using the Quick Dial key A Press the Quick Dial key in which the destination's number is pro- grammed B Press the {Start} key Specifying a group of destinations using the Quick Dial key A Place the original, and then select the scan settings you require Checking the Specified Destination A Make sure the destination name appears on the display B Press the {Check Destination} key D Press the {OK} key when confirmation is complete Searching for a Destination Search by Destination Name Selecting from Destination List Specifying a Registration Number Search by Fax Number Search by E-mailAddress E Enter an e-mailaddress to search for H Select the e-mailaddress to specify using {U} or {T} "Entering Text", General Settings Guide You can search with a part of the Reception 3. Using Internet Fax Functions Internet Fax Functions Internet Fax Precautions Functions Not Supported by E-mailTransmission Functions Not Supported by E-mailReception T.37 Full Mode Page Transmitting Internet Fax To enter the subject directly Setting Return Receipt To enter the programmed subject F Select the scan settings you re quire G Enter the e-mailaddress H To send the same document to multiple destinations, press [Add Dest] I Specify the next destination J Press the {Start} key -Aboutthe E-mailSubject -E-mailText Confirming Reception Canceling Internet Fax Transmission Scanned Receiving Internet Fax Auto E-mailReception Manual E-mailReception E-mailis in the server E-mailis not in the server Received Images 4. Programming Initial Settings and Adjustments ❖Own Fax Number (facsimile number of sender) Programming A Press the {User Tools/Counter} key B Select [Fax Features] using {U} or {T}, and then press the {OK} key Programming a Fax Header Programming an Own Name Programming an Own Fax Number Editing Deleting Programming Fax Numbers and E-mailaddresses 5. Troubleshooting Adjusting the Volume G You can adjust the volume using {W} or {V} I Press the {User Tools/Counter} key When {Facsimile} Key Is Lit in Red When Toner Runs Out Error Messages and Their Meanings Check whether there are any network problems [14-01] [14-09] [14-33] [15-02] [15-03] [15-11] [15-12] -Outof paper display message -Networkerror display message Solving Problems Receiving "Exceeded max. E mail size" error When Things Don't Go as Expected INDEX Page Page Page Page ❖FCC Requirements