Registering Folders

Note

If you have set "Connection Type" to [NDS], enter the user name followed by the name of the context where the user ob- ject is located. If the user name is “user” and the context name is “context”, enter “user.con- text”

Reference

p.149 “Entering Text”

J Press [Change] under Login Pass- word.

K Enter the password, and then press [OK].

Limitation

You can enter up to 64 charac- ters for the password.

L Enter the password again to con- firm, and then press [OK].

M Press [Folder].

N Press [NCP].O Select "Connection Type".

If you want to specify a folder in an NDS tree, press [NDS]. If you want to specify a folder on a NetWare server, press [Bindery].

P Specify the folder.

Note

To specify a folder, you can ei- ther enter the path manually or locate the folder by browsing the network.

Reference

p.99 “To locate the folder manu- ally”

p.100 “Using Browse Network to locate the folder”

To locate the folder manually

A Press [Change] under Path.

B Enter the path where the folder
is located.

5

 

Note

 

If you set "Connection Type" to [NDS], and if the NDS tree name is "tree", the name of the context including the vol- ume is "context", the volume name is "volume" and the folder name is "folder", then the path will be "\\tree\vol- ume.context\folder".

If you set "Connection Type" to [Bindery], and if the Net- Ware server name is "server", the volume name is "volume" and the folder name is "fold- er", then the path will be "\\server\volume\folder".

You can enter a path using up to 128 characters.

CPress [OK]DPress [Connection Test] to check the path is set correctly.EPress [OK].

Note

If the connection test fails, check the settings, and then try again.

99