If Your Machine Does Not Operate As You Want

 

 

 

 

 

 

Problem

Causes

Solutions

 

 

 

 

 

 

 

The main power in-

This occurs in the fol-

Close the exposure glass cover or ADF, and

 

 

dicator continues

lowing cases:

check if the machine communicating with a

 

 

blinking and does

•

The exposure

computer.

 

 

not turn off when

 

 

 

 

glass cover or the

 

 

 

pressed.

 

 

 

 

 

ADF is open.

 

 

 

 

 

 

 

 

 

•

The machine is

 

 

 

 

 

communicating

 

 

 

 

 

with external

 

 

 

 

 

equipment.

 

 

 

 

• The hard disk is

 

 

 

 

 

active.

 

 

 

 

 

 

 

 

Original images are

You may have load-

Load paper correctly. Load paper into Tray 1-4

 

 

printed on the re-

ed the paper incor-

with the print side up, and into the LCT or by-

 

 

verse side of the pa-

rectly.

pass tray with the print side down. See p.123

 

 

per.

 

 

“Orientation-Fixed Paper or Two-Sided Paper”.

 

 

 

 

 

 

 

Misfeeds occur fre-

The tray's side

Check the side guides are locked. See p.132

 

 

quently.

guides may not be

“Changing the Paper Size”.

 

 

 

locked.

 

 

 

 

 

 

 

 

 

The tray's end guide

Check the end guide is set properly. See p.132

 

 

 

may not be set prop-

“Changing the Paper Size”.

 

 

 

6

 

erly.

 

 

 

 

 

 

 

 

You may have load-

When using paper of a size that cannot be de-

 

 

 

ed paper of a size not

tected automatically, use Tray Paper Settings to

 

 

 

shown on the paper

set the paper size. See p.56 “Tray Paper Size:

 

 

 

size selector.

Tray 1–4”and p.162 “Copy Paper”.

 

 

 

 

 

 

 

An error message re-

When a misfeed mes-

Clear misfed paper, and then open and close the

 

 

mains, even if misfed

sage appears, it re-

front cover. See p.127 “x Clearing Misfeeds”.

 

 

paper is removed.

mains until you open

 

 

 

 

and close the cover,

 

 

 

 

as required.

 

 

 

 

 

 

 

 

An error message re-

This may occur if the

Press the {Start}key.

 

 

mains, even if con-

HDD is not installed.

 

 

 

sumables are

 

 

 

 

 

replaced and/or mis-

 

 

 

 

 

fed paper is re-

 

 

 

 

 

moved.

 

 

 

 

 

 

 

 

 

 

Cannot print in du-

You cannot use pa-

For duplex printing, select Tray 1-4 in copier

 

 

plex mode.

per in the bypass tray

mode or with the printer driver.

 

 

 

for duplex printing.

 

 

 

 

 

 

 

 

 

[1 Sided Copy] is se-

Select [2 Sided Copy] for Paper Type: Tray 1-4. See

 

 

 

lected for Paper

p.58 “Paper Type: Tray 1–4”

 

 

 

Type: Tray 1-4.

 

 

 

 

 

 

 

 

 

119