Settings You Can Change with User Tools

The paper sizes you can set for tray 2 are as follows:

A3L, B4 JISL, A4K, A4L, B5 JISK, B5 JISL, A5L, B6 JISL, A6L, PostcardL, 8KL, 16KK, 16KL

11"⋅17"L, 81/2"⋅14"L, 81/2"⋅11"K, 81/2"⋅11"L, 51/2"⋅81/2"L, 71/4"⋅101/2"L, 71/4"⋅101/2"K, 8"⋅13"L, 81/2"⋅13"L, 81/4"⋅13"L, 11"⋅14"L, 11"⋅15"L, 10"⋅14"L, 10"⋅15"L, 81/4"⋅14"L, 8"⋅101/2"L, 8"⋅101/2"K, 8"⋅10"L, 8"⋅10"K, C5L, C6L, DL EnvL, 41/8"⋅91/2"L, 37/8"⋅71/2"L, custom size (100-297 mm (3.97"-11.69") wide x 148-432 mm (5.83"-17.00") long)

Reference

p.132 “Changing the Paper Size”

Important

 

If the specified paper size differs from the actual size of the paper loaded

4

in the paper tray, a misfeed might occur because the correct paper size was

 

not detected.

 

Note

The paper guide for the optional LCT is fixed for A4K, 81/2"⋅11"K size paper. Contact your service representative if you need to change the paper size.

If the paper size set for the selector in paper tray is different to the paper size for this setting, the paper size of the dial has priority.

If you load paper of a size not indicated on the paper size selector in the paper tray, set the dial to "".

Default:

Tray 1: A4K, 81/2" ⋅ 11"K

Tray 2: A3L, 11" ⋅ 17"L

Tray 3: A4L, 81/2" ⋅ 11"L

Tray 4: A4L, 81/2" ⋅ 14"L

Reference

p.132 “Changing the Paper Size”

Paper Type: Bypass tray

Sets the display so you can see what type of paper is loaded in the bypass tray.

The paper types you can set for the bypass tray are as follows:

No Display, Recycled Paper, Special Paper, Colour Paper, Letterhead, Preprinted Paper, Label Paper, Bond Paper, Thick Paper, OHP, Thin Pa- per, Cardstock

Note

Default: No Display

57