Remarks

Do not carry the machine, by hold- ing the scanner assembly. Keep the machine level and carry it careful- ly, taking care not to jolt or tip it. Rough handling may cause a mal- function or damage the hard disk or memory, resulting in loss of stored files.

Do not take off the holding stand.

Protect the machine from strong shocks. Impact can damage the hard disk and cause stored files to be lost. As a precautionary meas- ure, files should be copied to an- other computer.

When the main power switch is in the stand-by position, the optional anti-condensation heaters are on. In an emergency, unplug the ma- chine's power cord.

When you unplug the power cord, the anti-condensation heaters turn off.

Make sure the plug is inserted firmly in the wall outlet.

Voltage must not fluctuate by more than 10%.

The wall outlet shall be installed near the machine and shall be eas- ily accessible.

Power Connection

RWARNING:

 

Connect the machine only to

 

the power source described on

 

the inside front cover of this

 

manual. Connect the power

7

cord directly into a wall outlet

 

 

and do not use an extension

 

cord.

Do not damage, break or make any modifications to the power cord. Do not place heavy ob- jects on it. Do not pull it hard nor bend it more than neces- sary. These actions could cause an electric shock or fire.

RCAUTION:

Unplug the power cord from the wall outlet before you move the machine. While moving the ma- chine, you should take care that the power cord will not be dam- aged under the machine.

RCAUTION:

When you disconnect the power plug from the wall outlet, always pull the plug (not the cable).

Access to the Machine

Place the machine near the power source, providing the clearance areas shown.

CP999EE

1.Rear: more than 1 cm (4")2.Right: more than 1 cm (4")3.Front: more than 75 cm (29.6")4.Left: more than 1 cm (4")

Note

For the required space when op- tions are installed, contact your service representative.

144