Ricoh 7500 Sender Settings, [OK], [Sender], [Search], Important, [Sender Name], C Select a sender, [Registration No.]

Sender Settings

Sender Settings

Use this function to set sender information.

If the sender's e-mail address is registered in the destination list, the sender can
	1
receive transmission results by e-mail.

Also, if you enable the Stamp Sender Name, the registered sender's name (user name) appears on the receiver's sheet, lists, and report.

Important

❒In the destination list, register senders, specify their e-mail addresses, and set the User Name as [Sender] in advance.

❒If user authentication is set, the user logged in is set as sender. The transmis- sion result is sent to the logged-in user's e-mail address.

A Place the original, and then select the scan settings you require. B Press [Sender Name].

C Select a sender.

To select a sender by specifying the registration number registered in the Address Book, press [Registration No.].

To search for a sender from the Address Book, press [Search].

If a destination protection code is set, the entry screen appears. Enter the protection code for destination using the number keys, and then press [OK].

97