Ricoh 7500 Changing the Line Port, ❖G3, ❖IP-Fax, ❖Multi-port

Changing the Line Port

Changing the Line Port

Select a line port or protocol to be used for standard fax or IP-Fax transmission.

When the extra G3 interface unit is installed, you can connect to a maximum of
	1
three ports.

Important

❒To add more fax lines, the optional extra G3 interface unit is required.

❖G3

G3 is selected after power up or when the machine is reset. If you install the extra G3 interface unit, you can select “G3-1”, “G3-2”, “G3-3”, or “G3 Au- to”depending on the number of the installed unit.

❖Multi-port

When the extra G3 interface unit is installed, communications can take place simultaneously through three lines at once.

The following list shows protocol combinations available for each line type.

Option	Available line types	Available protocol combinations
Without option	PSTN	G3
Extra G3 interface unit	PSTN n PSTN	G3 n G3
Extra G3 interface unit n	PSTN n PSTN n PSTN	G3 n G3 n G3
Extra G3 interface unit

❖IP-Fax

When sending an IP-Fax, select either “SIP” or “H.323” as the protocol.

To display “SIP” and “H.323” on the screen, make the settings in “Initial Set- tings” in the Facsimile Features menu.

Ask your administrator whether you should select “SIP” or “H.323” as the protocol.

57