Ricoh 7500 [OK], [OK], Important, [Backspace], [Delete All], [Edit Dest.], [Select Line], B Press [Manual Entry], A Make sure that [Fax] is selected

Specifying a Destination

Sending by IP-Fax

This section explains how to specify a destination using IP-Fax transmission.

When using IP-Fax transmission, specify the IP-Fax destination (IPv4 address,
	1
host name, or alias telephone number) in place of the fax number.

Important

❒Specify the protocol to be used in [Select Line] in advance.

A Make sure that [Fax] is selected.B Press [Manual Entry].C Enter the IP-Fax destination, and then press [OK].

If you enter an incorrect character, press [Backspace] or [Delete All]. Then, reenter the characters correctly.

To change the IP-Fax destination after pressing [OK], press [Edit Dest.], re-enter an IP-Fax destination, and then press [OK].

To select a destination from the Address Book, see “Using the Address Book to Specify Destinations”.

63