Transmission

D To add a destination, press [Add].

1

When you press [Prg. Dest.], you can register an entered destination in the destination list.

E

F

Specify the next destination.

To add another destination, repeat steps D and E.

Press the {Start}key.

The machine starts to scan the original and stores it in memory. When scanning ends, the Communicating indicator lights and transmission starts.

Note

Depending on security settings, [Manual Entry] may not appear, and you may be unable to enter the IP-Fax destination.

For a list of gateways (T.38-compliant), gatekeepers, or SIP servers that are certified as operable with this machine, contact your local reseller or serv- ice representative.

Methods of entering a destination vary depending on the network settings made by the administrator. Ask the machine administrator for details. For details aboutentering the IP-Fax destination, see “Regarding IP-Fax destinations”.

To avoid accidentally pressing the wrong Destination key, you can set the machine so that each time a destination is added using a Destination key, [Add] must be pressed. Make the setting in User Parameters (switch 17, bit 2) in the Facsimile Features menu.

For the maximum number of digits for a destination, see “Maximum Values”.

64