Ricoh 8025e, 8030e 6.Adding Paper, Toner and Staples

This chapter describes troubleshooting procedures that are applicable to all the machine's functions.

Loading Paper

This section describes what to do when paper runs out and needs reloading.

Note

❒Fan the paper before loading.

❒Straighten curled or warped paper before loading.

❒For paper types and sizes, see “Copy Paper”, About This Machine.

Reference

“Copy Paper”, About This Machine

Loading Paper into Paper Trays

This section describes how to load paper into the paper trays.

Important

❒If you add paper to a paper tray with paper left inside, a misfeed might occur.

❒Do not stack paper over the limit mark.

❒When loading small quantities of paper, be careful not to squeeze the side guide in too tightly, as the paper will not feed properly.

A Pull out the paper tray until it stops.

B Square the paper and load it in the tray with the copying face up.

ZEWY100E

C Push the paper tray in until it stops.

Reference