Ricoh SP 3500N The paper size setting in the tray, Error & Status Messages on the Control Panel

	Error & Status Messages on the Control Panel
Message	Explanation	Recommended Action
Replace Print Cartridge	The printer is out of toner.	Replace the print cartridge.
		See, p.93 "Replacing the Print
		Cartridge".
Replace soon Print Cartridge	The printer is almost out of	Prepare a new print cartridge.
	toner .
Replace Transfer Roller	It is time to replace the transfer	Contact your sales or service
	roller.	representative.
Reset Tray 1	The indicated paper input tray 1	Install the indicated paper input
	is not installed correctly, or not	tray 1 correctly.
	installed.
Service call SCXXX	There is a problem with the	Turn off the main power, and
	printer's controller.	then turn it on again.
		If the error occurs again,
		contact your sales or service
		representative.
Set Er: Prt Cart	The indicated print cartridge is	Set the indicated print cartridge
	not set correctly, or not set.	correctly.
	The error message appears	Using a dry cloth, carefully
	even though the print cartridge	wipe the interface area on the
	is set correctly.	print cartridge surface.
Size Msmtch: # Start/JobReset	The paper size setting in the tray	Load paper of the selected size
	# (1, 2, bypass) differs from	in the tray, and then press the
	that of actual paper si0ze in the	[Stop/Start] key to continue
	tray.	printing.
		Press the [Job Reset] key to
		cancel printing.
TypeMsmtch: # Start/JobReset	The paper type setting in the	Load paper of the selected type
	tray # (1, 2, bypass) differs	in the tray, and then press the
	from that of actual paper type in	[Stop/Start] key to continue
	the tray.	printing.
		Press the [Job Reset] key to
		cancel printing.

105