Ricoh SP 3510DN, SP 3500N Just wait until it resumes, System, and then press the OK key, Data

8. Troubleshooting

Status		Possible Causes, Descriptions, and Solutions
It takes too much time to resume	• The data is so large or complex that it takes time to process it.
printing.	If the Data In indicator is blinking, the data is being processed.
	Just wait until it resumes.
	• The printer was in the Energy Saver mode. To resume from the
	Energy Saver mode, the printer has to warm up, and this takes
	time until printing starts. To disable Energy Saver mode:
	1. Press the [Menu] key on the control panel, select
		[System], and then press the [OK] key.
	2.	Press the [ ] or [ ] key and select [Energy Saver 2], and
		then press the [OK] key.
	3.	Press the [ ] or [ ] key, and then select [Off].
It takes too much time to	• Photographs and other data intensive pages take a long time
complete the print job.	for the printer to process, so simply wait when printing such
	data.
	Changing the settings with printer driver may help to speed up
	printing.
	See the printer driver Help.
	• The data is so large or complex that takes time to process.
	If the Data In indicator is blinking, the data is being processed.
	Just wait until it resumes.
	• If the Data In indicator on the control panel is flashing, the
	printer is warming up. Wait for a while.
Images are cut off, or excess	If you are using paper smaller than the paper size selected in the
pages are printed.	application, use the same size paper as that selected in the
	application. If you cannot load paper of the correct size, use the
	reduction function to reduce the image, and then print.
	See the printer driver Help.
Photo images are coarse.	Some applications lower the resolution for making prints.

116