Ricoh SP 3510DN, SP 3500N manual Receiving an IP Address for IPv4 Automatically Dhcp

4. Configuration

Press the [] or [] key to enter the left most entry field of the address. After entering the left field, press the [OK] key, and then you can enter the next field. After completing to enter in the all field, press the [OK] key.

9.Use this method to assign Subnet Mask and Gateway Address.

10.Press the [Menu] key.

11.If you are requested to restart the printer, turn off the printer, and then turn it back on.

12.Print a configuration page to confirm the settings made.

• For details about printing the configuration page using control panel, see p.35 "Test Printing".

Receiving an IP Address for IPv4 Automatically (DHCP)

•When you use this printer protocol in the DHCP environment with IPv4 protocol, select [DHCP] following this procedure.

•When [DHCP] is selected, you cannot make settings for the following items:

•IP Address

•Subnet Mask

•Gateway Address

•Consult your network administrator for information about making network settings.

1.Press the [Menu] key.

CMC034

2.Press the [] or [] key to display [Host Interface], and then press the [OK] key.

Menu:

Host Interface

46