Ricoh SP 3510DN, SP 3500N manual After printing envelopes, make sure the levers are pulled up

2.Installing the Printer and Options

4.Remove the adhesive tape from the rear cover, and then open it.

CMC102

5.Pull out the tape, and then remove the protective materials.

CMC103

The actual printer may come with protective materials attached in different positions. Make sure to check the printer's exterior for all protective materials, and remove them completely.

6.Make sure the levers are pulled up.

CMC104

•If you leave the levers lowered, toner may not settle properly when printing on standard paper. Make sure the levers are pulled up before printing on standard paper. If not, print may easily smudge or rub off.

•After printing envelopes, make sure the levers are pulled up.

28