Samsung 500N setup guide Press the On Line/Continue

Message	Status	Do this...
Load	The paper size specified	Load the correct paper in the tray.
[Size] In Tray1	in the printer properties
OR	does not match the
	paper you are loading.
Load
[Size] In Tray2
Load Manual	It is waiting user’s	Load a sheet of print material and
Press Cont Key	action to print from the	press the On Line/Continue
	manual feeder with	button. You need to press the
	paper.	button for each page to be printed.
Main Motor	A problem has occurred	Unplug the power cord and plug it
Error	in the main motor of the	in again. If the problem persists,
	printer.	please call for service.
Memory Overflow	The printer does not	The job automatically clears and
	have enough memory to	the printer returns to Standby
	print the current job.	Mode.
	An error has occurred in	• Expand the memory in your
		printer. See “Installing Printer
	the firmware program of
		Memory” on page C.2.
	the printer.
Paper Empty	The paper tray has run	Load paper in the paper tray. See
[Size] In Tray1	out of papers.	page 3.4.
Paper Empty
[Size] In Tray2
Paper Empty
[Size] In Mp
Paper Empty
[Size] In Manual
Page Too Complex	Too much complicated	Simplify the page layout and
	data was sent to the	remove unnecessary graphics from
	printer.	your document.
		To expand the memory in your
		printer, see “Installing Printer
		Memory” on page C.2.
Ready [Color]	The corresponding toner	Redistribute the toner in
Low Toner	cartridge in your printer	corresponding toner cartridge,
	is nearly empty.	referring to page 6.5.
Ready	An IP address conflicts	Contact your network
IP Conflict	with only other devices	administrator and choose an
	on the network.	address within your subnet which
		will not conflict with any other
		devices.

7.28 SOLVING PROBLEMS