Take the following steps to change the frame type format:

1In ready mode press the Menu button () until you see ‘Network’ on the bottom line of the display. Press the Enter button () to access the menu.

2Press the Enter button ( ) when ‘Config Network’ displays on the bottom line.

3Press the scroll button ( or ) to display ‘Yes’ on the bottom line. Press the Enter button ( ).

4Press the Upper Level button ( ).

5Press the scroll button ( or ) until ‘Netware’ displays on the bottom line. Press the Enter button ( ).

6Press the Enter button ( ) when ‘On’ displays.

7Press the Upper Level button ( ), then use the scroll button ( ).

8Press the Enter button ( ) when ‘Config Netware’ displays.

9Press the scroll button ( or ) to display ‘Yes’ on the bottom line. Press the Enter button ( ).

10 Press the Upper Level button ( ), then use the scroll button ( ).

11 Press the Enter button ( ) when ‘IPX Frame Type’ displays.

12 Press the scroll button ( or ) until you see the desired frame type and press the Enter button ( ).

13 Press the On Line/Continue button ( ) to return to ready mode.

B

USING YOUR PRINTER ON A NETWORK B.11

Page 213
Image 213
Samsung 500N setup guide Using Your Printer on a Network B.11