14 Close the left cover firmly.

15 Turn the printer on.

16 In ready mode press the Menu button () on the control panel until you see ’Setup’ on the bottom line of the display.

17 Press the Enter button (

) to access the menu.

18 Press the scroll button (

or ) until ‘Maintenance’

displays on the bottom line and press the Enter button ().

19 Press the scroll button ( or ) to until ‘Check Others’ displays on the bottom line and press the Enter button ( ).

20 Press the scroll button ( or ) to display ‘Transfer Belt’ on the bottom line and press the Enter button ( ).

21 Press the scroll button ( or ) to display ‘Reset’ and press the Enter button ( ).

22 ‘Reset Now’ appears on the bottom line of the display and the printer returns to the ready mode.

NOTE: After replacing the transfer belt, you must reset the image counter for the transfer belt. If you do not this, ‘Replace Transfer Belt’ continuously appears on the display.

6.28 MAINTAINING YOUR PRINTER

Page 146
Image 146
Samsung 500N setup guide Close the left cover firmly Turn the printer on