Samsung 500N setup guide For Networking Printing, Using an Ethernet cable

For Networking Printing

You can attach your CLP-500 or CLP-500N printer to a network using an Ethernet cable (UTP cable with RJ.45 connector).

CLP-500N has a built-in network interface card. If you are a CLP-500 user, you need to install an optional network interface card.

If you want to use the printer in both a wired and a wireless network environments, you need to install an optional wired/ wireless network interface card. For details about installing the card, see the User’s Guide of your printer in the CD-ROM.

Using an Ethernet cable

1Make sure that both the printer and the computer are turned off.

2Plug one end of the Ethernet cable into the Ethernet network port on the Printer.

English

To the network

LAN connection

3Plug the other end of the cable into a network LAN connection.

For details about installing the network card, see the User’s Guide of your printer in the CD-ROM.

SETUP GUIDE 21