If you want to print on previously printed paper from the Multi-purpose Tray, the printed side should be facing up with the uncurled edge towards the printer. If you experience problems with the paper feeding, turn the paper around.

NOTE: Make sure that you have

3

not loaded too much print

material.

 

The print material buckles if you

 

load a stack that is too deep or if

 

you push it in too far.

 

5When you print a document, set the paper source to MP Tray and select the correct paper type in the software application. For details, see page 4.7.

NOTE: After printing fold away the paper support extension and close the Multi-purpose Tray.

USING PRINT MATERIALS 3.11

Page 75
Image 75
Samsung 500N setup guide Using Print Materials