Configuring TCP/IP

Your printer can be set up on a variety of TCP/IP networks. There are several ways in which your printer can be assigned a TCP/IP address, depending on your network.

Static Addressing: TCP/IP address is assigned manually by the system administrator.

Dynamic Addressing BOOTP/DHCP(default): TCP/IP address is assigned automatically by the server.

Static Addressing

To enter the TCP/IP address from your printer’s control panel, take the following steps:

1In ready mode press the Menu button ( ) until you see ‘Network’ on the bottom line of the display. Press the Enter button ( ) to access the menu.

2Press the Enter button ( ) when ‘Config Network’ displays on the bottom line.

3Press the scroll button ( or ) to display ‘Yes’ and press the Enter button ( ).

4Press the Upper Level button ( ), then use the scroll button ( ).

5Press the Enter button ( ) when ‘Config TCP’ displays.

6Press the scroll button ( or ) to display ‘Yes’ and press the Enter button ( ).

7Press the Upper Level button ( ), then use the scroll button ( ).

8Press the Enter button ( ) when ‘IP Get Method’ displays.

9Press the scroll button ( or ) to display ‘Static’ and press the Enter button ( ).

10 Press the Upper Level button ( ), then use the scroll button ( ).

11 Press the Enter button ( ) to access the IP Address menu.

B.8 USING YOUR PRINTER ON A NETWORK

Page 210
Image 210
Samsung 500N setup guide Configuring TCP/IP, Static Addressing