
Getting Started
Getting Started
The 53i must be set up and configured prior to its first use. This section describes phone behavior and start up screens you may see when the phone is first plugged in, or when it is restarted.
Plugging in and Starting the Phone
The 53i automatically begins the start up sequence as soon as it is connected. The phone goes through this process the first time you plug in your phone and every time you restart your phone.
1.The phone displays the following startup screens.
Initializing
network
Aastra 53i
The 53i phone then checks settings and looks for new configuration and firmware updates for the phone from a server. If a new update is found, the phone displays the message “Updating Configuration”. This may take a few moments while the phone downloads the latest updates.
Updating configuration
Note: New updates to your phone can be automatically scheduled from the server. This is set up on the phone system by your System Administrator and should be scheduled during
Important! Do not unplug or remove power to the phone while it is checking or installing firmware and configuration information.
4Model 53i IP Phone User Guide