Configuring a BLF List Key

Aastra Web UI

The BLF List function can be configured on the 53i using the Aastra Web UI only.

If you set a key to use BLF/List, you must also enter a BLF List URI at Operation- >Programmable Keys->Services. The BLF List URI is the name of the BLF list defined on the BroadSoft BroadWorks Busy Lamp field page for your particular user. For example, my480i-blf-list@as.broadworks.com. The value of the BLF\List URI parameter must match the list name configured. Otherwise, no values display on the 53i screen and the feature is disabled.

1.Click on Operation->Programmable Keys. or

Click on Operation->Expansion Module <N>.

2.Select a "Key 3" through "Key 6".

3.In the "Hard Key" field, select "BLF\List" (BroadSoft BroadWorks).

Note: The "Label" and "Value" field are not required. The BroadWorks BLF List name is configured in the "BLF List URI" field instead.

4.In the "Line" field, select a line number that is actively registered to the appropri- ate SIP proxy you are using. Valid values are Global (for all lines), or 1 through 9.

5.In the "BLF List URI" field, enter the name of the BLF list defined on the Broad- Soft BroadWorks Busy Lamp field page for your particular user. For example, my53i-blf-list@as.broadworks.com.

Note: Contact your System Administrator for the BLF List URI.

6. Click to save your changes.

Line Keys and Programmable Keys

Model 53i IP Phone User Guide 51

Page 59
Image 59
Aastra Telecom 53i IP Phone manual Configuring a BLF List Key