Additional Features

Incoming Call Interrupts Dialing

If you are dialing a call on your phone and another call comes in while you are dialing, you can allow the incoming call to interrupt dialing by enabling a parameter called "Incoming Call Interrupts Dialing". You can enable or disable this parameter in the Aastra Web UI at the path

Basic Settings->Preferences->General.

When you enable this field in the Aastra Web UI, an incoming call automatically interrupts the outgoing call during dialing and allows the phone to ring for you to answer the incoming call.

When you disable this parameter, which is the default, the phone does not interrupt the outgoing call during dialing and instead rings the incoming call on another free line (or sends busy signal if all remaining lines are busy). You have a choice to ignore the incoming call, or answer the incoming call on another line. If you choose to answer the incoming call, you can answer the call, finish the call, and then hang up.

You can still go back to the original outgoing call and finish dialing out.

Notes:

1. On a 53i, you must use the down arrow key to ignore the call. To answer the call you must press the line key where the call is coming in.

2.If you disable this field, and the phone receives an incoming call while you are dialing an outgoing call, you can pick up the call and perform transfer or conference as required.

Configuring "Incoming Call Interrupts Dialing"

Aastra Web UI

Use the following procedures to configure "Incoming Call Interrupts Dialing" on the IP Phone.

Note: "Incoming Call Interrupts Dialing" is disabled by default.

1. Click on Basic Settings->Preferences->General.

2.Enable the "Incoming Call Interrupts Dialing" field by checking the check box. Disable this field by unchecking the box). Default is disabled.

3.Click to save your settings.

124Model 53i IP Phone User Guide

Page 132
Image 132
Aastra Telecom 53i IP Phone manual Configuring Incoming Call Interrupts Dialing