An IP address consists of 4 bytes.

Enter a number between 0 and 255 for each byte.

12 Press the scroll button ( or ) to enter a number between 0 and 255 and press the Enter button ().

13 Repeat Step 12 to complete the address from the 1st byte to the 4th byte.

14 To select other parameters, such as the Subnet Mask or Gateway, press the scroll button ( or ). Press the Enter button ( ).

15 Repeat steps 12 through 13 to configure the other TCP/IP parameters.

16 Press the On Line/Continue button ( ) to return to ready mode.

Dynamic Addressing (BOOTP/DHCP)

To assign the TCP/IP address automatically by the server, take the following steps:

1In ready mode press the Menu button ( ) until you see ‘Network’ on the bottom line of the display. Press the Enter button ( ) to access the menu.

2Press the Enter button ( ) when ‘Config Network’ displays on the bottom line.

3Press the scroll button ( or ) to display ‘Yes’ and press the Enter button ( ).

4 Press the Upper Level button (

), then use the scroll

B

button ( ).

 

5Press the Enter button ( ) when ‘Config TCP’ displays.

6Press the scroll button ( or ) to display ‘Yes’ and press the Enter button ( ).

USING YOUR PRINTER ON A NETWORK B.9

Page 211
Image 211
Samsung 500N setup guide An IP address consists of 4 bytes, Dynamic Addressing BOOTP/DHCP