Samsung AF0AKV3SAEENSG manual Troubleshooting, Problem Solution

Models: AF0AKV3SAEENSG

1 80
Download 80 pages 33.41 Kb
Page 27
Image 27

Troubleshooting

Refer to following chart if the air conditioner operates abnormally. This may save time and unnecessary expenses.

PROBLEM

SOLUTION

 

• Check power status and then operate the air conditioner again.

The air

• Check whether the power plug is connected correctly or the auxiliary

conditioner does

power switch is switched on.

not work at all.

• If the air conditioner is switched off by the Timer function, press the

 

On/Off button.

The temperature

• Temperature adjustment is not available when the Fan mode is

adjustment is not

selected.

working.

 

Fan speed

• Check if you have selected Auto/Dry/Turbo mode. In these modes,

adjustment is not

fan speed is set to Auto and you cannot adjust the fan speed.

working.

 

 

• Replace the exhausted batteries with new ones.

Remote controller

• Do not block the remote controller receiver.

• If the remote controller is used near strong light(3-wavelength

does not work.

fluorescent light, neon sign etc.), the remote controller may not work

 

 

due to the electronic jamming signal

 

• Check if the set temperature is higher than the current temperature.

 

Press the Temp + or - button on the remote controller to set the

 

temperature lower than the current temperature.

 

• Check if you have selected Fan mode. In this mode, Cool air will not

 

come out in Fan mode therefore select Auto/Cool/Dry mode.

 

• Check if the air filter is blocked by dirt. If there is a lot of dust on the

 

Air filter, cooling performance may decrease. Clean them frequently.

Cool air does not

• Check if the outdoor unit is covered or installed near the obstacle.

Take the cover off and take the obstacle away.

come out of the

• Check if the indoor unit is installed in a place with direct sunlight.

air conditioner.

Close the curtain or blind to cover the sunlight.

 

 

• If the doors or windows are open, it may cause bad cooling

 

performance. Close the doors and windows.

 

• If the air conditioner has just been turned on or the indoor

 

temperature reaches the desired temperature, only fan will operate

 

around 3 minutes for the product protection.

 

• Check if the pipe length is too long. When the pipe length exceeds

 

maximum allowable pipe length, cooling performance may decrease.

USING PARTS

English 27

Page 27
Image 27
Samsung AF0AKV3SAEENSG manual Troubleshooting, Problem Solution