Connecting power and communication cable
This product uses the power for 380 V 50 Hz,
1Remove the cover of the electrical component on the outdoor unit.
2Connect the power cable (R, S, T, N) to the R, S, T, N of the terminal on the electrical component on the outdoor unit. (Power cable must be purchased separately.)
3When tightening the screw on the terminal block, apply appropriate tightening torque to assemble cables to the terminal.
4Install ELB [Earth Leakage breaker (for 4 wires)] for air conditioner. It must be selected according to the starting current of the compressor.
Indoor unit | Outdoor unit |
Communication
terminal
1(L) 2(N) | F1 F2 | F2 F1 | R | S | T | N | Earth |
|
|
|
|
|
| ||
| unit connection wire |
|
|
|
|
| |
Distributing board
ELB for ELB for outdoor unit indoor unit
Earth | R | S | T | N | L | N | Earth |
Power supply cable for outdoor unit
Power supply cable for indoor unit
INSTALLATION PARTS
English 59
