Preparation for installation

You must check the model names of the indoor and outdoor units.

Indoor  outdoor unit type and combination

•Select the moving path in advance.

•Be sure that moving path can support weight of the outdoor unit.

•Do not slant the product more than 30˚ when carrying it. (Do not lay the product down in sideways.)

•Surface of the heat exchanger is sharp. Be careful not to get injured while moving the product.

•If you need to ensure the outdoor unit from falling, use wires to fix it firmly.

––Loosen the 4 screws from the top cover of the outdoor unit.

––Put the wire around the screws and fasten the screws.

––Fix the wire on the ground.

NOTE

•When the outdoor unit is not firmly fixed, it may fall and cause personal injury or property damage.

•When the outdoor unit is installed in water-proofed rooftop, fix the wires on the wall.

English 33