Setting ethernet speed | Samsung CLX-216x specification

6Set the first byte between 0 and 255 using the Scroll buttons and press OK to move to the next byte.

Repeat this to complete the address from the 1st byte to the 4th byte.

7When you have finished, press OK.

8Repeat steps 5 and 6 to configure the other TCP/IP parameters: subnet mask and gateway address.

9Press the Scroll buttons until Static appears and press OK.

10Press the Scroll buttons until Primary DNS appears and press OK.

11Enter each byte of the address and press OK.

12Press the Scroll buttons until Secondary DNS appears and press OK.

13Enter each byte of the address and press OK.

14Press Stop/Clear to return to Standby mode.

Dynamic addressing (BOOTP/DHCP)

To have a TCP/IP address assigned automatically by the server, take the following steps:

1Press Menu until Copy Menu appears on the bottom line of the display and press OK.

2Press the Scroll buttons until Network appears and press OK.

3Press OK when TCP/IP appears.

4Press the Scroll buttons until DHCP or BOOTP appears and press OK.

5Press Stop/Clear to return to Standby mode.

Setting ethernet speed

You can select the communication speed for Ethernet connections.

1Press Menu until Copy Menu appears on the bottom line of the display and press OK.

2Press the Scroll buttons until Network appears and press OK.

3Press the Scroll buttons until Ethernet Speed appears and press OK.

4Press the Scroll buttons until the speed you want appears and press OK.

5Press Stop/Clear to return to Standby mode.

Restoring the network configuration

You can return the network configuration to its default settings.

1Press Menu until Copy Menu appears on the bottom line of the display and press OK.

2Press the Scroll buttons until Network appears and press OK.

3Press the Scroll buttons until Clear Setting appears and press OK.

4Press OK when Yes appears to restore the network configuration.

5Power the machine off and back on.

Printing a network configuration page

The Network Configuration page shows how the network interface card on your machine is configured.

1Press Menu until Copy Menu appears on the bottom line of the display and press OK.

2Press the Scroll buttons until Network appears and press OK.

3Press the Scroll buttons until Network Info. appears and press OK.

4Press OK when Yes appears.

The Network Configuration page prints out.

4.2 <Network setup (CLX-2160N only)>

Image 22

Samsung CLX-216x manual Setting ethernet speed, Restoring the network configuration, Printing a network configuration

Contents

Page Page Contact Samsung World Wide Country Customer Care Center Web Site Contents Copying Using USB flash memorySelecting and loading print media Basic printing Specifications MaintenanceTroubleshooting Ordering supplies Environmental and Safety Consideration Safety and Regulatory InformationImportant Precautions and Safety Information Laser Safety Statement Recycling Ozone SafetyPower Saver Radio Frequency Emissions Replacing the Fitted Plug for UK Only Page Introduction Special featuresFeatures CLX-2160 CLX-2160N See the Software Section Machine overview Front view Control panel overview Status LED with the toner cartridge messages Understanding the Status LEDStatus LED Status Description Selecting a location Finding more informationClearance space Click Printer Setting Altitude adjustmentPrinting a demo Copy Menu System setupMenu overview Scan Menu Changing the display language Using the power save modeAuto continue Software overview Printer driver featuresSupplied software Linux System requirementsWindows Macintosh Configuring TCP/IP Network setup CLX-2160N onlySupported operating systems Printing a network configuration Setting ethernet speedRestoring the network configuration Dynamic addressing BOOTP/DHCP Loading originals Selecting and loading print mediaSelecting print media Type Size Dimensions Weight Capacitya Supported print media types and sizes Guidelines for selecting and storing print media Media sizes supported in each modeMode Size Source Guidelines for special print media To avoid damaging the machine, use only Tray Loading paperLoading paper in the tray Changing the size of the paper in the tray Close the paper cover Slide the tray back into the machine Manual feeder Tips on using the manual feederLoad the paper with the side to be printed on facing up Setting the paper size and type Selecting the paper tray Changing the settings for each copyCopying Reduced/Enlarged copy Setting copy timeout Changing the default copy settingsOriginal type ID card copying Using special copy featuresUp or 4-up copying Poster copying Clone copying Erasing background images Basic printing Canceling a print jobPrinting a document Scanning Scanning to an application using a local ConnectionScanning basics Scanning to a network client Scanning using a network connection CLX-2160N onlyPreparing for network scanning Adding the machine to the Network Scan program Changing the default scan settings Changing the settings for each scan jobSetting network scan timeout About USB memory Using USB flash memoryPlugging in a USB memory device Scanning Scanning to a USB memory deviceCustomizing scan to USB Deleting an image file Printing from a USB memory deviceManaging USB memory Formatting a USB memory device Printing directly from a digital camera Viewing the USB memory status Clearing memory MaintenancePrinting reports Printing a report Cleaning the outside Cleaning your machineCleaning the inside Cleaning the scan unit Toner cartridge storage Maintaining the toner cartridgeRedistributing toner Expected cartridge life Replacing the toner cartridge Replacing the imaging unit Maintenance Replacing the waste toner container Checking the machine’s serial number Maintenance partsManaging your machine from the website Checking replaceables Tips for avoiding paper jams TroubleshootingClearing paper jams Paper exit area Understanding display messages Low Heat Error Message Meaning Suggested solutions Install TonerInstall Cycle Power Solving other problems Paper feeding problems Printing problems Toner specks Printing quality problemsDropouts Vertical lines Condition Suggested solutions White SpotsCondition Suggested solutions Vertical repetitive Color or Black Wrinkles or Condition Suggested solutions Curl or waveCondition Suggested solutions Character Voids Creases Copying problems Scanning problems Common Windows problems Network Scan problems CLX-2160N onlyCommon Macintosh problems Common Linux problems Problem Possible cause and solutions You should wait for completion Problem Possible cause and solutions Ordering supplies How to purchaseSupplies How to purchase Supplies General specifications SpecificationsPrinter specifications Scanner and copier specifications Index Numerics System requirements Macintosh Software section Contents Sharing the Printer Locally Using Your Printer in Linux Installing Software for Local Printing Installing Printer SoftwareTypical Installation Custom Installation Select Typical installation for a local printer. Click Next Select Custom installation. Click Next Select the components to be installed and click Next Installing Software for Network Printing Custom Installation Select Custom installation. Click Next Reinstalling Printer Software Select the components you want to reinstall and click Next Removing Printer Software Next Printing to a file PRN Printing a DocumentSelect your printer driver from the Name drop-down list Layout Tab Printer SettingsPaper Orientation Source Paper TabScaling Printing Quality Color ModeGraphics Tab Advanced Options About Tab Extras TabPrinter Tab Using a Favorite Setting Using Help Advanced Printing Printing Multiple Pages on One Sheet of Paper N-Up Printing Printing Posters Printing Booklets Fitting Your Document to a Selected Paper Size Printing on Both Sides of PaperPrinting a Reduced or Enlarged Document None Creating a Watermark Using WatermarksUsing an Existing Watermark Editing a Watermark Using a Page Overlay Using OverlaysWhat is an Overlay? Creating a New Page Overlay Check the Share this printer box Setting Up a Host ComputerSetting Up a Client Computer Select Local Port and click New Port Understanding Smart Panel Toner Level Changing the Smart Panel Program Settings Opening the Troubleshooting GuideUsing Printer Settings Utility Using Onscreen Help File Scanning Using Samsung SmarThru Uninstalling Samsung SmarThru Using Samsung SmarThru Scanning Using the WIA Driver Scanning Process with TWAIN- enabled SoftwareWindows XP Windows Vista Installing the Unified Linux Driver Installing the Unified Linux DriverGetting Started Uninstalling the Unified Linux Driver Click Uninstall Opening the Unified Driver Configurator Using the Unified Driver ConfiguratorPrinters Configuration Printers Tab Classes Tab Scanners ConfigurationPorts Configuration Sharing Ports Between Printers and Scanners Configuring Printer Properties Printing a Document Printing from Applications Printing Files Scanning a DocumentClick Properties Using the Image Manager Adding Job Type Settings Tools Function Uninstalling the Printer driver Installing Software for MacintoshInstall the Printer driver Double-click the Samsung Splc Installer icon Uninstalling the Scan driver Setting Up the PrinterInstall the Scan driver For a Network-connected Macintosh Printing Changing Printer SettingsLayout Setting Printing a Document Printing Multiple Pages on One Sheet of Paper Printer Features SettingResolutionQuality Paper Type Scanning Index WIA, scan Ver