Scanning to a USB memory device

You can scan a document and save the scanned image onto a USB memory device. There are two ways of doing this: you can scan to the device using the default settings, or you can customize your own scan settings.

Scanning

1Insert a USB memory device into the USB memory port on your machine.

2Place a single original face down on the scanner glass. For details about loading an original, see page 5.1.

3Press Scan to.

4Press OK when Scan to USB appears on the bottom line of the display.

5Press OK, Color Start or Black Start when USB appears. Regardless of the button you press, the color mode is decided as customized. See “Customizing scan to USB” on page 9.2.

Your machine begins scanning the original, and then asks if you want to scan another page.

6Press OK when Yes appears to scan more pages. Load an original and press Color Start or Black Start.

Regardless of the button you press, the color mode is decided as customized. See “Customizing scan to USB” on page 9.2.

Otherwise, press the Scroll buttons to select No and press OK.

After scanning is complete, you can remove the USB memory device from the machine.

Note

Your machine creates the SCANFILE folder on the USB drive, and stores scanned data.

Customizing scan to USB

You can specify image size, file format, or color mode for each scanning to USB job.

1Press Menu until Scan Menu appears on the bottom line of the display and press OK.

2Press the Scroll buttons until Scan Feature appears and press OK.

3Press OK when USB Memory appears.

4Press the Scroll buttons until the setting option you want appears and press OK.

You can set the following options:

Scan Size: Sets the image size.

Original Type: Sets the original document’s type.

Resolution: Sets the image resolution.

Scan Color: Sets the color mode. If you select Mono in this option, you can not select JPEG in Scan Format.

Scan Format: Sets the file format in which the image is to be saved. When you select TIFF or PDF, you can select to scan multiple pages. If you select JPEG in this option, you can not select Mono in Scan Color.

5Press the Scroll buttons until the desired status appears and press OK.

6Repeat steps 4 and 5 to set other setting options.

7When you have finished, press Stop/Clear to return to Standby mode.

You can change the default scan settings. For details, see page 8.3.

9.2 <Using USB flash memory>

Page 41
Image 41
Samsung CLX-216x manual Scanning to a USB memory device, Customizing scan to USB