Setting network scan timeout
If the Network Scan program on your computer does not send a refresh request and does not scan a job within a specified timeout period, your machine cancels the scan job. You can change this timeout setting as needed.
1Press Menu until Scan Menu appears on the bottom line of the display and press OK.
2Press the Scroll buttons until System Setup appears and press OK.
3Press OK when Machine Setup appears.
4Press the Scroll buttons until NetScanTimeout appears and press OK.
5Enter the desired timeout value and press OK.
The change will be broadcast over the network and will apply to all clients connected to the network.
6Press Stop/Clear to return to Standby mode.
Changing the settings for each scan job
Your machine provides you with the following setting options.
•Scan Size: Sets the image size.
•Original Type: Sets the original document’s type.
•Resolution: Sets the image resolution.
•Scan Color: Sets the color mode.
•Scan Format: Sets the file format in which the image is to be saved. If you select TIFF or PDF, you can select to scan multiple pages.
To customize the settings before starting a scan job:
1Press Menu until Scan Menu appears on the bottom line of the display and press OK.
2Press the Scroll buttons until Scan Feature appears and press OK.
3Press OK when USB Memory appears.
4Press the Scroll buttons until the scan setting option you want appears and press OK.
5Press the Scroll buttons until the desired status appears and press OK.
6Repeat steps 4 and 5 to set other setting options.
7When you have finished, press Stop/Clear to return to Standby mode.
Changing the default scan settings
To avoid having to customize the scan settings for each job, you can set up default scan settings.
1Press Menu until Scan Menu appears on the bottom line of the display and press OK.
2Press the Scroll buttons until Scan Setup appears and press OK.
3Press OK when Change Default appears.
4Press OK when USB Memory appears.
5Press the Scroll buttons until the scan setting option you want appears and press OK.
6Press the Scroll buttons until the desired status appears and press OK.
7Repeat steps 5 and 6 to change other settings.
8Press Stop/Clear to return to Standby mode.
8.3 <Scanning>
