Loading paper
In the tray
Load the print media you use for the majority of your print jobs in the tray. The tray can hold a maximum of 150 sheets of 75 g/m2 (20 lb bond) plain paper.
Loading paper in the tray
1Pull the tray out of the machine.
2Open the paper cover.
3Adjust the size of tray until it sound click.
4Enlarge the tray by adjusting the paper width guide.
5Flex the paper sheets back and forth to separate pages and then fan them while holding one edge. Tap the edges of the stack on a flat surface to even it up.
6Load paper with the print side up.
Make sure not to overfill the tray and that all four corners are flat in the tray and under the brackets, as shown below. Overfilling the tray may cause a paper jam.
7Squeeze the paper length guide and slide in it until it lightly touches the end of the paper stack.
5.5 <Selecting and loading print media>
