Filling the water tank

When you open the cooking compartment door, you will see the water tank on the right- hand side. Only fill the tank with fresh tap water or with still bottled water. If your water is very hard, we recommend that you use softened water (see also “Water hardness).

Caution

Do not fill the water tank with distilled water or any other

 

liquids.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Fill the water tank before Lift the water tank over the interlock and pull the tank out

each useof the appliance. Fill the water tank with cold water up to the “max.” mark. Close the lid until you feel it engage. Slide the water tank back until it engages.

Empty the water tank

Pull the water tank out of the appliance slowly. Pulling it

after each use

out quickly may cause water to spill. Hold the water tank

 

horizontally, so that no remaining water can drip out of the

 

valve seat.

 

Empty out the water.

 

Thoroughly dry the water tank in the appliance and the

 

seal in the lid.

“Fill water tank” display

If the water tank is empty, a signal sounds.

 

A symbol appears in the display. The operation is

 

interrupted.

 

1. Open the cooking compartment door carefully. Steam

 

will escape.

 

2. Take out the water tank, fill to the “max” mark and

 

reinsert.

 

3. Press the START button.

Removing drip tray

Empty drip tray at regular intervals. Push drip tray in until

 

you hear a click, and remove tray from locked position.

Drip tray

Push in and

remove

14_ before you begin

FQV313T004_BOL-03643P_EN.indb 14

2010-07-30 �� 6:07:12

Page 294
Image 294
Samsung FQV313T004/BOL manual Filling the water tank, Empty the water tank, After each use, Fill water tank display