13.2 <
Maintenance>
Clearing memory
You can selectively clear information stored in your machine’s memory.
Caution
For SCX-5530FN users, before clearing the memory, make sure
that all fax jobs have been completed, or you will lose those
jobs.
1Press Menu until System Setup appears on the bottom line of the
display and press OK.
2Press the Scroll buttons until Clear Setting appears and press OK.
3Press the Scroll buttons until the item you want to clear appears.
The options in the colored cells are available only with SCX-
5530FN.
4Press OK when Yes appears.
5Press OK again to confirm clearing.
6Repeat steps 3 through 5 to clear another item.
7Press Stop/Clear to return to Standby mode.
Options Description
All Settings Clears all of the data stored in memory and
resets all of your settings to the factory default.
Fax Setup Restores all of the fax options to the factory
default.
Copy Setup Restores all of the copy options to the factory
default.
Scan Setup Restores all of the scan options to the factory
default.
System Setup Restores all of the system options to the
factory default.
Network Restores all of the network options to the
factory default.
Address Book Clears all of the fax number and email address
entries stored in memory.
Sent Report Clears all records of sent faxes and emails.
Fax Rcv
Report
Clears all records of received faxes.
NetScan
Report
Clears the information on network scan
sessions in memory.
Cleaning your machine
To maintain print and scan quality, follow the cleaning procedures below
each time the toner cartridge is replaced or if print and scan quality
problems occur.
Caution
Cleaning the cabinet of the machine with cleaning materials
containing large amounts of alcohol, solvent, or other strong
substances can discolor or distort the cabinet.
Cleaning the outside
Clean the cabinet of the machine with a soft lint-free cloth. You can
dampen the cloth slightly with water, but be careful not to let any water
drip onto or into the machine.
Cleaning the inside
During the printing process, paper, toner, and dust particles can
accumulate inside the machine. This buildup can cause print quality
problems, such as toner specks or smearing. Cleaning the inside of the
machine clears or reduces these problems.
1Turn the machine off and unplug the power cord. Wait for the
machine to cool down.
2Open the front cover and pull the toner cartridge out. Set it on a
clean flat surface.
Cautions
• To prevent damage to the toner cartridge, do not expose it to
light for more than a few minutes. Cover it with a piece of
paper, if necessary.
• Do not touch the green surface underside of the toner
cartridge. Use the handle on the cartridge to avoid touching
this area.