
166 Section 2J: Using SprintPCS Ready Link
䡲If one of the group members takes the floor, you will
see the member’s name and SprintPCS Ready Link
number on the display.
4. When the call is finished, press .
Tip:The phone beeps if you press when another contacthas the floor.
Tip:You can also make a Group Call after checking the group member.
Press to display group members, highlight<Call Group>and press and
hold during step 3 above.
Tip:To redial your lastSprintPCS Ready Link call, highlight Redial and press
from the SprintPCS Ready Link List.
Making a SprintPCS Ready Link Call by Entering a NumberTo place a SprintPCS Ready Link call by entering a number:
1. From standby mode, enter the SprintPCS Ready Link
number you wantto dial.
2. Press to place the SprintPCS Ready Link call.
(Continue holding to take the floor and speak.)
䡲The contact’s name appears on the display if there is
a matched number in your SprintPCS Ready Link List.
3. Continue with the SprintPCS Ready Link call, pressing
and holding to speak and releasing itto allow
others to reply.
4. When the call is finished, press .
– or –