168 Section 2J: Using SprintPCS Ready Link
Receiving aSprint PCS Ready Link Call
To receive a SprintPCS Ready Link call:
1. Make sure your phone’s SprintPCS Ready Link mode is
enabled (see “Setting SprintPCS Ready Link Mode”on
page 160).
2. When you receive a SprintPCS Ready Link call from a
contact, “R-Link Call,”the contact’s name, and the
SprintPCS Ready Link number appear on the display.
(You do notneed to take any action to answer the call.)
䡲When you receive a group call, “Group Call”and the
SprintPCS Ready Link number appear.
䡲If nobody takes the floor for 20 seconds, the call will
be a missed Ready Link call.
3. If the person placing the call has keptthe floor (held the
Ready Link/Memo button), you will see the contact
name and SprintPCS Ready Link number along with “has
floor.,”and you will hear the caller speaking.
4. When the caller finishes speaking and releases , you
will see “Floor is open.”on the display screen. Press and
hold to take the floor and reply to the caller. (You will
see “You have floor.”and hear a tone confirming thatyou
may speak.)
5. When the conversation is finished, press .
Tip:You can also receive a SprintPCS Ready Link call with the flip closed.
Press and hold to take the floor when the floor is open.
Note:You can change the volume and the speakerphone setting while a
SprintPCS Ready Link call is activated. Volume:Adjustthe voice volume by
using the Side Up/Down key or by pressing the navigation key up or down
exceptwhen you are pressing and holding .Speaker:Switch the
speakerphone on or off by pressing .