SATO 410e, 400e manual DSW2 Default Settings, DSW2 Configuration, DSW2 Function Descriptions

Unit 4: Operation

DSW2 DEFAULT SETTINGS

2-1	2-2	2-3			2-4		2-5	2-6	2-7	2-8
OFF	OFF	OFF				OFF	OFF	OFF	OFF	OFF
				DSW2 CONFIGURATION
DSW2	FUNCTION					SETTING		CONFIGURATION
2-1	Print Mode					OFF	Thermal Transfer
						ON	Direct Thermal
2-2	Reserved					OFF	N/A
						ON	N/A
2-3	Head Check					OFF	Head Check Disabled
						ON	Head Check Enabled
2-4	Hex Dump					OFF	Hex Dump Disabled.
						ON	Hex Dump Enabled
2-5	Receive Buffer					OFF	Single Job Receive Buffer
						ON	Multi-Job Receive Buffer
2-6	Firmware Download					OFF	Disabled
						ON	Enabled
2-7	Protocol Code					OFF	Standard Protocol Mode
						ON	Non-Standard Protocol Mode
2-8	Operational Mode					OFF	Standard Mode
						ON	Compatibility Mode
			DSW2 FUNCTION DESCRIPTIONS
FUNCTION							DESCRIPTION
Print Mode			Print with the use of ribbon or without.
Head Check			When enabled, will check for malfunctioning head elements.
Hex Dump			Allows hexadecimal printing of all data received to the print buffer.
Receive Buffer			Allows to continuously receive print jobs while compiling and printing
			other jobs.
Firmware Download			Places printer in mode for downloading software into flash ROM.
Protocol Code			Selects the command codes used for protocol control.
Operational Mode			Standard mode or for original XL400/410.

SATO XL400-410e Operator Manual PN 9001135A Page 4-4