SATO 400e, 410e manual DSW1 DEFAULT SETTINGS

Unit 4: Operation

DSW1 DEFAULT SETTINGS

1-1	1-2	1-3			1-4		1-5	1-6	1-7	1-8
OFF	OFF	OFF			OFF		OFF	OFF	OFF	OFF
				DSW1 CONFIGURATION
1-1	Data BIt				OFF		8 Data Bit
					ON		7 Data Bit
				1-2		1-3
1-2				ON		ON	Reserved
	Parity			ON		OFF	Odd
1-3
				OFF		ON	Even
				OFF		OFF	None
1-4	Stop Bit				OFF		1 Stop Bit
					ON		2 Stop Bit
				1-5		1-6
1-5				ON		ON	Normal: 2400, High Speed: 57600
	Baud Rate
				ON		OFF	Normal: 4800, High Speed: 38400
1-6
				OFF		ON	Normal: 19200, High Speed: 19200
				OFF		OFF	Normal: 9600, High Speed: 9600
				1-7		1-8
1-7				ON		ON	Status 4
	Protocol
				ON		OFF	Status 3
1-8
				OFF		ON	XOn / XOff
				OFF		OFF	Ready / Busy
			DSW1 FUNCTION DESCRIPTIONS
FUNCTION							DESCRIPTION
Data Bit			Sets	the printer to receive either 7 or 8 bits of data for each byte
			transmitted.
Parity			Selects the type of parity used for error detection.
Stop Bit			Selects the number of stop bits to end each byte transmission.
Baud Rate			Select the data rate (bps) for the RS232 port.
Protocol			Selects the flow control and status reporting protocols.

SATO XL400-410e Operator Manual PN 9001135A Page 4-3