SATO 410e, 400e Normal Mode, Menu, Description, Default Settings Mode, Non-Standard Code Clear

Unit 4: Operation

		NORMAL MODE
	MENU	DESCRIPTION
NORMAL MODE		Basic print functions.
ONLINE		Receives data and can issue a label. Displays the countdown
000000	00000000	number and the count-up number in the lower region on the
		LCD.
CENTER HOLE		Center Hole is the factory default media. If another media has
000000	00000000	been selected, that will be displayed. The countdown and
		count-up quantites is also displayed.
PRINT DARKNESS		Allows the selection of print density and displays the selection.
X X X	X
PRINT SPEED		Allows the selection of printing speed and displays the
X X X	X X	selection. The print speed options are determined by the printer
		XL400e or XL410e being used. The lower digits are the slower
		speeds and ascends with the numeral digits. The speed is
		based on inches.
PRINT OFFSET		Allows the entry of the horizontal and vertical print offset and
V: +000	H: +000	displays the entry. The offset is determined by the number of
		dots with a range of 0 to 400. Either + or - options allow for the
		determination of a positive or negative numeral.
ZERO SLASH		Allows for the zero slash to be enabled or disabled. Zero slash
YES	NO	enabled provides for a slash to be printed diagonally across the
		numeral zero to differentiate it from the letter “O”.
CANCEL PRINT JOB		Permits the print job to be aborted.
YES	NO
CANCEL PRINT JOB		Confirms the print job has been canceled or aborted.
COMPLETED

		DEFAULT SETTINGS MODE
MENU			DESCRIPTION
DEFAULT SETTING			REturns the print density, print speed, offset correction, zero
YES	NO		slash, and character pitch to their initial values. Press the FEED
			key to initiate. Switch power off to discontinue.
DEFAULT SETTING			After confirming the settings, turn the power off.
COMPLETE

	NON-STANDARD CODE CLEAR
MENU		DESCRIPTION
ALT. PROTOCOL		Allows the non-standard protocol code to its default values. The
DEFAULT COMPLETE		default values are: STX (7B), ETX (7D), ESC (5E), ENQ (40),
		NULL (7E), CAN (21), and Offline (5D).

SATO XL400-410e Operator Manual PN 9001135A Page 4-22