SATO 410e, 400e manual Configuration Modes, Normal Mode

Unit 4: Operation

CONFIGURATION MODES

With exception of the Power switch located on the back side of the printer, all of the following configuration activities are performed via the use of the operator panel located on the printer’s right side and the adjustment panel located within the printer’s interior.

Many settings may also be controlled via software commands. In the case of conflict between the software and control panel settings, the printer will always use the last entered valid setting.

NORMAL MODE

When a print job is received, the LCD will count off the label quantity as they are printed.

START/STOP

POWER

Printer beeps

ONLINE

000000 00000000

Display of media	START/STOP			START/STOP + FEED
selected.
MEDIA TYPE	Display of media default
To change
	or selection.
selection.
	PRINT DARKNESS
	1	2	3
				PRINT OFFSET
				V: +000	H: +000
START/STOP to scroll.				START/STOP to scroll.
FEED to select.
				FEED to select.
PRINT SPEED				ZERO SLASH
X X	X X
				YES	NO
START/STOP to scroll.				START/STOP to scroll.
FEED to select.
				FEED to select.
PRINT OFFSET				CANCEL PRINT JOB
V: +000	H: +000
				YES	NO
START/STOP to scroll.
FEED to select.
				Yes / No
CANCEL PRINT JOB			3	START/STOP to scroll.	START/STOP to scroll.
			seconds
COMPLETED				FEED to select.	FEED to select.
			transpires

Figure 4-1, Normal Mode

SATO XL400-410e Operator Manual PN 9001135A Page 4-6