SATO 400e, 410e manual Service Mode, Menu, Description

Unit 4: Operation

		SERVICE MODE
	MENU	DESCRIPTION
SERVICE MODE		Menu allows configuration media type.
COUNTER CLEAR		Selects the counter to clear. The options are None, All, Print
	NONE	Head, Cutter, and Dispenser. The default value is NONE: Do
		not clear. START/STOP key moves the cursor and the FEED
		key selects the option.
PRINT SIZE		Sets the print size for the test print. START/STOP key moves
SMALL LARGE		the cursor and the FEED key selects the option.
PRINT SIZE		Sets the width of test print media. START/STOP key moves the
	3CM	cursor and the FEED key selects the option.
SERVICE PRINT		Initiates test printing. Press the FEED key to initiate test printing
PRESS FEED KEY		and FEED again to interrupt. Press EJECT to eject a label or
		tag when printing is interrupted.
GAP	x.xV	Sets slice level. Sets the threshold level between 0-3.2. When
INPUT	x.xV	the value is set at 0, auto setting is done through the firmware
		software. START/STOP key moves the cursor and the FEED
		key selects the option.
I-MARK	x.xV	Sets the eye-mark sensor threshold. Sets the threshold level
INPUT	x.xV	between 0-3.2. When the value is set at 0, auto setting is done
		through the firmware software. START/STOP key moves the
		cursor and the FEED key selects the option.
PAPER SENSOR		Displays the status of the paper under the R-Corner Sensor (to
R-CORNER	[X]	check the sensor only). When “0” is displayed, media is not
		detected. When “1” is displayed, media is detected. The FEED
		key advances to the next sensor display.
PAPER SENSOR		Displays the status of the paper under the Side Hole Sensor (to
SIDE HOLE	[X]	check the sensor only). When “0” is displayed, media is not
		detected. When “1” is displayed, media is detected. The FEED
		key advances to the next sensor display.
CUT OFFSET		Selects the media type to be set. Press START/STOP to scroll
CENTER HOLE +000		the media options and the FEED key to select.
CUT OFFSET		Sets the cut offset value. The range is +/- 0 to 999. Press
CENTER HOLE +000		START/STOP to scroll the options in each field and FEED to
		advance when each is set.
SERVICE MODE		The FEED key shifts to backfeed offset settings and the START/
BACKFEED OFFSET		STOP key the Counter Display selection.
BACKFEED OFFSET		Selects the media type to be set. Press START/STOP to scroll
CENTER HOLE +00		the media options and the FEED key to select.
BACKFEED OFFSET		Sets the cut offset value. The range is +/- 0 to 99. Press
CENTER HOLE +00		START/STOP to scroll the options in each field and FEED to
		advance when each is set.
SERVICE MODE		The FEED key shifts to the Counter Display selection and the
COUNTER DISPLAY		START/STOP key the Counter Clear selection.
COUNTER DISPLAY		Selects the counter type to be displayed. Press START/STOP
	LIFE	to scroll options and the FEED key to select.

SATO XL400-410e Operator Manual PN 9001135A Page 4-25