SATO CL408-412e manual Configuration Modes, Normal Mode

Unit 4: Printer Configuration

CONFIGURATION MODES

This chapter provides an overview of the various configuration modes of the operation menu. All of the configuration activities are performed via the use of the operator panel located on the printer’s face. However, many settings may also be controlled via external software commands. In the case of conflict between external software commands and internal software commands (control panel settings) the printer will always use the last valid setting (the default is software commands).

NORMAL MODE

This mode allows configuration of printing features that are prone to change from job to job. These are some of the most basic and common adjustments of all of the configuration modes.

Refer to the Menu Definition Tables in the following chapter to provide an explanation of each menu screen.

POWER: ON

	ONLINE
		QTY: 000000
						Reprints
	LINE				FEED	last label if
						enabled.
		LINE + FEED
	OFFLINE			000000
						Feeds
	LINE				FEED	one label if
						DSW3-3 is
						OFF.
	PRINT DARKNESS
	1	2	3	4	5
					LINE	Scrolls
	FEED					options
	PRINT SPEED
	2	3	4	5	6
Scrolls	LINE
options					FEED
	PITCH OFFSET
				+00MM
					LINE	Scrolls
	FEED					options
	CANCEL PRINT JOB
		YES		NO
				LINE
YES				NO		YES
With DSW2-5: OFF						With DSW2-5: ON
			FEED
FEED						FEED
Current				All		All
print job			print jobs			print jobs
canceled			saved			canceled

Figure 4-1, Normal Mode

CL408-412e Supplemental Manual 4-6 PN: 9001159A