SATO CL408-412e Languages are provided as options, Operator to manage the expanded memory card

			Unit 4: Printer Configuration
			SERVICE MODE (TABLE 4-4)
MENU			DESCRIPTION
SELECT LANGUAGE
		ENGLISH
		FRENCH	Allows the selection of the character set used by the printer. The world’s primary commercial
		GERMAN
		SPANISH	languages are provided as options.
		ITALIAN
	PORTUGESE
		ENGLISH
		ENGLISH
			Allows the selection of which type of operator programming will take priority precidence. By
			selecting the COMMAND option, downloaded command codes will be recognized by the printer
PRIORITY SETTING
			as most important where conflicting data exists.
COMMAND		LCD
			Selecting LCD, places programming through the operator panel as taking precedence.
			This menu screen allows the pulse width to be set if single-item buffer has been chosen. If single-
IEEE1284
ACK SIGNAL		XX.X	item buffer has not been chosen, this setting will not have effect.
			Allows the determination of whether to ignore the CAN and DLE commands used in bi-directional
IGNORE		CAN/DLE
YES		NO	communications. This menu option will only be applicable if multi-item buffer has been chosen.
BACKFEED SPEED			Allows of the backfeed movement to be established. Two setting options are available.
NORMAL	SLOW
			CARD MODE (TABLE 4-5)
MENU			DESCRIPTION
			Is the first menu screen of the Advanced Mode. The Advanced Mode is provided to make basic
			printer operational adjustments. Typically, once these adjustments or settings have been made,
ADVANCED MODE
			they will not require additional address unless a new bob is downloaded.
			Is only a transitional menu screen for the Service Mode.
			Is the first menu screen of the Card Mode and is informational only. The Card Mode allows the
CARD MODE
			operator to manage the expanded memory card.
			Determines the type of optional expanded memory that will be addressed as CC1 in the
			command stream. The CARD selection spcifies the optional PCMCIA card as CC1 and the
MEMORY SELECT (CC1)
CARD	MEMORY		optional expanded Flash ROM as CC2. The MEMORY selection specifies the optional expanded
			Flash ROM as CC1 and the optional PCMCIA card as CC2.
CARD ->MEMORY COPY			Allows the copying of TrueType fonts from the PCMCIA Memory card to the optional Flash ROM.
TRUETYPEFONT Y/N

CL408-412e Supplemental Manual 4-22 PN: 9001159A