Sears 113.241591 Warning To Avoid Injury Due To Accidental Start, Turn Switch Off And, Bracket

WARNING: TO AVOID INJURY DUE TO

ACCIDENTAL START, TURN SWITCH "OFF" AND

REMOVE PLUG FROM POWER SOURCE OUTLET.

2.MAKE SURE THE BLADE IS ALL THE WAY UP AND SQUARE WITH THE TABLE.

3.Position SPREADER SUPPORT on rod behind

the rip fence guide bar, /

BLADE SQUARE

WITH TABLE

RIP FENCE

GUIDE BAR

SPREADER SUPPORT

POSITIONED ON ROD

BEHIND RIP FENCE

GUIDE BAR

\

4. Assemble the 7/8 in. long setscrews, nuts. \

Iockwashers and washers to the SPREADER \

SUPPORT BRACKET and slip the nuts into the slot in the spreader support.

5, Locate spreader support and bracket on rod. 1/16 inch behind the fence guide bar.

6, Finger tighten ONLY THE HEX NUTS.

SPREADER SUPPORT

..._-_-_BRACKET

VIEW LOOKING DOWN

FROM TOP

7.Lay a piece of flat straight wood and a square on saw table and rotatethe SPREADER SUPPORT until the bracket is aligned with square.

B.

24