When "Wl DTH OF RIP" is 6 in. and Wi DER use your RIGHT Hand to feed the workpiece until it is clear of
the table.
Use LEFT hand ONLY to guide the .work piece ... do not FEED the workp ece with the left hand,
When "WIDTH OF RIP" is 2 in, to 6 in. wide USE THE
PUSH STICK tc feed the work.
When WIDTH OF RIP is NARROWER than 2 in,. the
push stick CANNOT be used because the guard will
interfere... USE the AUXILIARY FENCE/WORK SUPPORT and PUSH BLOCK.
Attach Auxi!!ary Fence/Work Support to rip fence with two ' C c amps.
/
34
