10. Wrap the Weight Cable (52) around a 2" Pulley (4).
Attach thePulley to theRightArm (16) with a 3/8" x
1 3/4" Bolt(40) and 3/8" Nylock Nut (6).
Laythe Weight Cable (52) over a 3 1/2' Pulley (5).
Attacha Cable Trap (67) and the Pulley to the side
of theUpright (9)with a 3/8" x 1 3/4' Bolt(40)
and 3/8' Nylock Nut (6). Make sure that the Cable
Trap is in the "12 o'clock" position.
11. Wrap theWeight Cable (52) under a 2" Pulley (4).
Attachthe Pulleyto the bracket on the side of the
Moment Arm (74) with a 3/8" x 1 3/4" Bolt(40)
and 3/8" NylockNut (6). Make sure that the Weight.
Cable is betweenthe Pulleyand the indicated tab.
Attach theend of the Weight Cable (52) to the right
sideof the Leg Developer (23) with a 3/8' x 2 1/4"
Boil(45) and 3/8" NylockNut (6). Do not over'llght-
enthe Nylock Nut, the Cable must be able Io swiv-
elfreely or it will be damaged.
12. Insertthe threadedbolt on the end of the Weight
Cable (52) into theAdjustment Bracket (53). Finger
tightenthe 5/16" Nut (82) onto the threaded bolt
untilthere isslight tensionin the Cable.
13. Wet the upper ends of the left and Right Arms (15,
16) and the insidesof the two Large Pads (17) with
soapywater. Slide the Large Pads onto the Arms.
Altochthe Backrest(19) to the Upright (9) with two
1/4' x 2 1/2" Bolts(46).
12
13
17
1
6