![](/images/new-backgrounds/1306728/30672835x1.webp)
Loading the Imaging Film
3 Remove the imaging film cartridge
from the print compartment (grasp the handle at the front of the cartridge) and turn it over.
4 Remove the used film from the
cartridge.
5 Remove the four green gears from
the used film.
DO NOT DISCARD THE FOUR GREEN GEARS!
6 Remove the new roll of imaging film from its packaging.
•Do not yet remove the band that holds the rolls together.
7 Insert the large gear into the green end of the empty spool. Make sure the two protrusions on the large gear fit firmly into the slots in the end of the spool.
Insert the remaining three gears into the spools, making sure the protrusion on each gear fits firmly into one of the slots in the end of each spool.
•If needed, pull the spools apart slightly to allow the gears to fit (the band will stretch).
Slot Protrusion
Large gear
16