Sharp FO-781 operation manual General problems, Loading Printing Paper in Chapter

Answering machine connection

General problems

Problem	Check and remedy
Information cannot be	• Make sure the fax is plugged in and the imaging film
programmed in the fax.	and paper have been loaded. (Programming is not
	possible if the imaging film and printing paper have
	not been loaded.) See Loading the Imaging Film and
	Loading Printing Paper in Chapter 1.
Nothing appears in the	• Make sure the power cord is properly plugged into a
display.	power outlet.
	• Connect another electrical appliance to the outlet to
	confirm that it has power.
The machine does not	• If a beep sound is not made when you press the
respond when you press	keys, unplug the power cord and then plug it back in
any of its keys.	several seconds later.
Automatic document	• Check the size and weight of the document (see
feeding does not work for	Transmittable documents in Chapter 2).
transmission or copying.
Voice calls taken on an	• The fax may interrupt during a voice call if the
extension phone are	reception mode is set to A.M.. To prevent interruption
interrupted by the fax.	on a tone dial extension phone, press any three keys
	on the extension phone after answering. (Note: Do
	not enter the code to activate fax reception.)
No reception occurs when	• Make sure you have not run out of paper.
polling is attempted.
	• Make sure the transmitting machine is in automatic
	reception mode.
	• If the transmitting machine has polling security, make
	sure that your fax number has been entered both in
	your machine and in the transmitting machine.
Bell Tinkle	• The operation of this equipment on the same line as
(New Zealand)	the telephone or other equipment with audible
	warning devices or automatic ring detectors will give
	rise to bell tinkle or noise and may cause false
	tripping of the ring detector. Should such a problem
	occur, contact your authorised Sharp Service Centre
	for information.

94