Scale entries
You have a choice of either manual or automatic method for scale entry.
If the first method is chosen, the clerk needs to enter the reading of the scale manually. If the second one is chosen, the weight is automatically read from the connected scale (option) and appears on the POS terminal display. For the refund entry, only manual scale entries is allowed.
■Manual scale entries
➞Net weight ➞ [SCALE] ➞ Base weight ➞ [(x)] ➞ (Single item entry)
•Net weight: 5 digits (2 digits integer + 3 digits decimal) or 2 digits (2 digits integer) depending on programming
•Base weight: 2 digits
•When you use the base weight programmed for the PLU, skip the base weight entry (➞ Base weight ➞ [(x)]).
•Repeat and multiplication entry are not allowed.
•For a refund or return entry, touch the [REFUND] or [RETURN] key at any timing (except the last position) in the key sequence.
■Auto scale entries
With open tare weight entry
➞[OPEN TARE] ➞ Tare weight ➞ [SCALE] ➞ Base weight ➞ [(x)] ➞ (Single item entry)
Using preset tare weight
➞Tare table number ➞ [SCALE] ➞ Base weight ➞ [(x)] ➞ (Single item entry)
•When you use a base weight programmed for the PLU, skip the base weight entry (➞ Base weight ➞ [(x)]).
•When you use the tare table number programmed for the PLU, skip the tare table number entry (➞ Tare table number).
•When scale entry is compulsory for the PLU, it is not necessary to touch the [SCALE] key.
To issue a tare weight receipt
➞[OPEN TARE] ➞ Tare weight ➞ [SCALE] ➞ [CASH n]
38
